D-Link DBT-120 - Manual (Page 54)

55
Remove Pairing Remove Pairing Remove Pairing Remove Pairing Remove Pairing
When devices are paired, the configuration information is saved on both devices.
Devices remain paired until the relationship is broken on both devices.
To break a paired device relationship
•
In the Windows System Tray, right-click the Bluetooth icon, then Setup and
select Security from the fly-out menu.
•
From the Bluetooth Security dialog box, in the Paired Devices list, select a
device, click the Delete button and then click the Done button.
Note: Pairing must be broken on both devices.
Passkey Passkey Passkey Passkey Passkey
A Passkey is an alphanumeric string of up to 16 characters in length. Passkeys are
also called PIN codes, or Personal Identification Numbers.
In Bluetooth for Windows, passkeys are used in the Authentication and Encryption
process.
Request Dialog Request Dialog Request Dialog Request Dialog Request Dialog
Security Request Dialog Box Security Request Dialog Box Security Request Dialog Box Security Request Dialog Box Security Request Dialog Box
A Bluetooth Authorization or Bluetooth Passkey Request dialog box may appear
(depending on security settings) when a connection is attempted if either
Authorization or Authentication is enabled. The method of notification depends on
the version of Windows:
•
Windows 2000, Windows ME and Windows XP - A bubble message is
displayed over the Bluetooth icon in the Windows System Tray
•
Windows 98SE - The Bluetooth for Windows icon in the Windows System
Tray blinks.
Regardless of the version of Windows, click the Bluetooth icon in the Windows
System Tray and then follow the on-screen instructions. The instructions vary,
depending on the security configuration of the system.
If the security notification is ignored the connection request will fail after a preset
timeout.
The dialog box provides
•
Device Name: the user-friendly name of the device attempting to connect.
•
Request to access: the service the remote device is attempting to access.
•
Buttons for responding are as follows:
o OK - allow the connection