D-Link DBT-120 - Manual (Page 21)

22
•
In the right panel of the Configuration screen, choose Select Manually from
Local Network Connections and select the 0000:Bluetooth PAN Driver. Be
sure to check the Enable Address Server (DHCP) from the Options item.
•
On the left side of the Configuration screen, check Ethernet and select the
LAN card the PC is using.
Now, you have successfully configured your PC or laptop to the Bluetooth server so
Bluetooth client devices in the vicinity can link to the Bluetooth server.
Bluetooth Serial Port Bluetooth Serial Port Bluetooth Serial Port Bluetooth Serial Port Bluetooth Serial Port
The Bluetooth Serial Port service allows two Bluetooth devices to establish a
wireless connection through virtual communications ports and then use that
connection as if it were a hardwired serial cable between the devices.
To establish a Bluetooth serial port connection:
Connections are initiated from the client:
1. On the client, in the Folders panel of My Bluetooth Places, select Entire
Bluetooth Neighborhood.