Daktronics Single Section DistaView Outdoor LED Scoreboards Generation IV - Manual (Page 24)

Mechanical Installation 3-1
Section 3: Mechanical Installation
Mechanical installation consists of installing concrete footings and steel beams and mounting
the scoreboard and accompanying ad panels to the beams.
3.1 Scoreboard Protective Devices
Note: Some users install devices to protect the scoreboard from projectiles.
Scoreboard protection devices not provided by Daktronics must be approved by
Daktronics prior to installation. Failure to follow this approval procedure will void
the scoreboard warranty. Daktronics makes available optional devices, including
screens and netting, to help protect the scoreboard from damage due to normal ball
impacts.
3.2 Erecting Beams and Columns
Reference Drawings:
Installation Specifications; BA-624-31, SO-2013-31 ..... Drawing A-55007
Installation Specifications; BA-1018-31 ......................... Drawing A-61904
Installation Specifications; MS-915-31 ......................... Drawing A-113568
Installation Specifications; FB-824 & SO-824 .............. Drawing A-127287
Installation Specifications; SO-2008 ............................ Drawing A-149074
Installation Specifications; BA-2004/2005/2011 .......... Drawing A-152777
Installation Specifications; TI-2015 .............................. Drawing A-173484
Installation Specifications; MS-2004 ............................ Drawing A-176286
Installation Specifications; BA-2010 ............................ Drawing A-179304
Installation Specifications; 5'x10' DistaView ................ Drawing A-206385
Installation Specifications; 5'x10' DistaView
1 side ad panel ...................................................... Drawing A-206433
Installation Specifications; 5'x10' DistaView
2 side ad panel ...................................................... Drawing A-206437
Installation Specifications; 3'x6' DistaView .................. Drawing A-222869
Installation Specifications; 3'x6' DistaView
1 side ad panel ...................................................... Drawing A-222872
Installation Specifications; 3'x6' DistaView
2 side ad panel ...................................................... Drawing A-222875
Installation Specifications; BA-2715-31 ....................... Drawing A-229969
Installation Specifications;
BA-2715-31 with 1 Ad panel .................................. Drawing A-229970
Refer to the drawings listed above for typical display installation with and without
ad panels. The drawings depict beams, footings, and wiring conduits.
Be sure that the installation complies with local building codes and is suitable for
both the type of soil and for wind conditions in the area. A licensed structural
engineer must design all footings and beam structures.
Note: Daktronics assumes no liability for structures designed and installed by others.