Daktronics Single Section DistaView Outdoor LED Scoreboards Generation IV - Manual (Page 10)

Introduction 1-1
Section 1: Introduction
This manual explains the installation of Daktronics DistaView Outdoor LED Scoreboards
and provides details for display maintenance. With questions regarding the safety,
installation, operation or service of these systems, contact Daktronics Customer Service at 1-
877-605-1115. For more information on Daktronics Customer Service see Section 5.9 of this
manual.
1.1 How To Use This Manual
Important Safeguards:
1. Read and understand these instructions before installing the display.
2. Do not drop the control console or allow it to get wet.
3. Properly ground the scoreboard with a grounding electrode at the
scoreboard location.
4. Disconnect power when the scoreboard is not in use.
5. Disconnect power when servicing the scoreboard.
6. Do not modify the scoreboard structure or attach any panels or coverings to
the scoreboard without the express written consent of Daktronics, Inc.
Figure 1 illustrates the Daktronics drawing numbering system. Daktronics identifies
individual engineering drawings by their drawing number (7087-P08A-69945 in the
example), which is located in the lower right corner of the drawing. This manual
refers to drawings by their last set of numbers and the letter preceding them. The
example would be Drawing A-69945.
Figure 1: Daktronics Drawing Label
Reference drawings are grouped and inserted in alphanumeric order in the
Appendix.
Listed below are a number of drawing types commonly used by Daktronics, along
with the information that each is likely to provide.
ƒ System riser diagrams: overall system layout from control room to
display, power, and phase requirements.