Daktronics Outdoor LED Scoreboards Installation - Manual (Page 37)

Scoreboard Options 31
To install a changeable panel:
1. Insert the screws on the caption changing pole (Daktronics part # 0F-1091-0099) into
the keyholes on the panel.
2. Lift the panel all the way up into the upper retainer and then insert the bottom of the
panel into the lower retainer (Figure 34).
3. Take the screws on the caption changing pole out of the keyholes.
Reverse this procedure to remove the caption panel.
The caption changer pole is extendable. Loosen the ring tightener and extend the pole to the
desired length, and then tighten the ring before lifting the caption.
CAUTION: The aluminum caption changer can conduct electricity. Do not use it within
20' (6.1 m) of power lines. Also be careful when using the caption changer in high or
gusting winds. Wind may catch the panel and unhook it from the changer or make it
difficult to maintain a grip on the pole. Hold the pole tightly in windy conditions.
5.6 Portable Power Pack Hookup Option
A portable power pack permits operation of a small scoreboard via battery power. The power
pack is provided by customer and should include batteries, a charger, and a 120 VAC power
inverter. Daktronics has a hookup kit available (part # 0A-1192-0349) for a customer-provided
battery pack. Refer to Drawing A-1039104 in Appendix B for installation procedures.