Daktronics BA-1518-11 Multi-Section Outdoor LED Scoreboard - Manual (Page 7)

Finally, Daktronics part numbers are commonly listed on drawings. Those part numbers can be used
when requesting replacement parts from Daktronics Customer Service. Take note of the following
part number formats. (Not all possible formats are listed here.)
+ "0P-_ _ _ _-_ _ _ _" denotes an individual circuit board, such as a driver board.
+ "0A-_ _ _ _-_ _ _ _" denotes an assembly, such as a circuit board and the plate or bracket to
which it is mounted. A collection of circuit boards working as a single unit may also carry an
assembly label.
+ "W-_ _ _ _" denotes a wire or cable. Cables may also carry the assembly numbering format in
certain circumstances. This is especially true of ribbon cables.
+ "F-_ _ _ _" denotes a fuse.
+ "T-_ _ _ _" denotes a transformer.
+ "PR-_ _ _ _ _ -_" denotes a specially ordered part.
+ "M-_ _ " denotes a metal part, and "0M_ _ _ _ _ _" typically denotes a fabricated metal
assembly.
1.3 Manual Overview
This manual details outdoor LED timing displays with numeric digits. It is divided into the following
sections:
Section 1: Provides an overview of the product, product safety information, labeling and
numbering descriptions.
Section 2: Contains a list of drawings to be used in model identification.
Section 3: Contains specifications for scoreboard models listed in this manual.
Section 4: Contains a list of drawings listing component locations.
Section 5: Lists specific schematic drawings for each scoreboard model.
Section 6: Contains information regarding mechanical installation.
Section 7: Contains information pertaining to electrical installation.
Section 8: Provides details concerning scoreboard maintenance and troubleshooting.
Section 9: Provides information for team name message center maintenance.
Section 10: Lists optional scoreboard features.
Appendix A: Contains all engineering drawings referenced in the manual.
Appendix B: Contains information about eyebolts and scoreboard lifting.
The various sections in this manual contain model-specific information, including dimensions, digit
configuration, and power requirements. The scoreboard engineering drawings, located in Appendix A,
also list dimensions, weight, and mounting instructions for each display. Additionally, the model
number and electrical requirements can be found on a label on the display entrance panel.
1.4 Product Overview
Daktronics outdoor LED scoreboards are part of a family of scoring and timing displays designed to
offer easy installation, readability and reliability. Microprocessor control assures consistent operation
and accuracy.
Introduction 1-3