Crest Electronics CRE57000 TRAIN ENGINEER REVOLUTION MANUAL User Manual

Page 29

6.RADIO CONFIGURE
This menu has two settings available, RF-

CHANNEL and GROUP ID.
RF-CHANNEL - All Revolution transmitters are

factory set to channel 16. In most cases this can

be left as is but if you suspect that interference

from a local source is effecting the range of

YOUR system, you can choose a new channel

to help eliminate the interference. Note that

you must relink any locomotives that you have

if you change the RF Channel number.
GROUP ID - If you have more than 50

locomotives that you want to control or you

have multiple areas that you want to control

with separate transmitters, you can select a

different Group ID for each transmitter and they

will operate independently of one-another. It

is also important that visitors who might bring their own Train Engineer Revolution

and locomotives have a different group ID. Group ID numbers are set randomly

at the factory so duplication should not be a problem and you may never have to

change this setting. Note that you must relink any locomotives that you have if you

change the Group ID number.
1) From the Main Menu screen select 6.RADIO CONFIGURE and press ENTER
2) When RF-CHANNEL is highlighted, use the t and u keys to change to the new

RF-CHANNEL. Available Channels are channel 16 thru channel 26

3) Highlight GROUP ID and use the t and u keys to SELECT a new GROUP ID

Number. The range for Group ID numbers is 0000 thru 9999

Press MENU to return to the Main Menu.

7.MY MEMO
This menu item is provided to allow you

to personalize your transmitter so that the

owner can be identified if it gets mixed up

or left behind at a running session with other

Revolution TE owners. Each field can contain up

to 20 letters and/or numbers.
1) From the Main Menu screen select 7.MY

MEMO and press ENTER

2) Fill in your name and contact information.
Press MENU to return to the Main Menu.

MAIN SET UP

2.USAGE OF CAB
3.ADD MU/SU
4.COPY LOCO
5.SYSTEM CONFIGURE

6.RADIO CONFIGURE

a.RF-CHANNEL[CH:16]
b.GROUP ID. [8455]

MAIN SET UP

3.ADD MU/SU
4.COPY LOCO
5.SYSTEM CONFIGURE
6.RADIO CONFIGURE

7.MY MEMO

NAME:
___________________
INFO:
___________________