CREATOR MAX-1301HD-B - Manual (Page 7)

CREATOR Corporation China 2010-06 WWW.CREATOR1997.COM
2 User’s Manual for MAX-1301HD-B Scaler Switching System
Chapter 2 System Host Introduction
2.1 MAX-1301HD-B Front Panel
Instruction
1 MIC Input Port
2 LCD Screen
3 SENSOR
Infrared receiving window is for the control of
infrared device, and receiving code when in
infrared learning.
4 Signal Source Selection Key --- for
choosing signal source input type, used
along with⑤
CV Signal Switching Key
For choosing CV signal, press and hold it for 1
second to access the adjustment mode of
brightness, contrast, saturation, sharpness and
chroma.
P4 2.4.1 CV Instruction
COMP Signal Switching Key
For choosing the input of VOMP signal, press and
hold it 1 second to access to the adjustment
mode
of brightness, contrast, saturation,
sharpness and chroma
P4 2.4.2 COMP Instruction
Y/C Signal Switching Key
For choosing the input of Y/C signal, press and
hold it 1 second to access to the adjustment
mode
of brightness, contrast, saturation,
sharpness and chroma
P 5 2.4.3 Y/C Instruction
HDMI Signal Switching Key
For choosing DVI/HDMI signal input, press and
hold for 1 second to access to adjustment mode
of brightness, contrast, saturation, sharpness and
chroma
P5 2.4.4“HDMI Instruction
VGA Signal Switching Key
For choosing VGA signal input, press and hold it
for 1 second to access to the adjustment mode of
brightness and contrast.
P5 2.4.5 VGA Instruction
The indicators on the signal source
selection keys are corresponding with the signal