CREATOR MAX-1301HD-B - Manual (Page 22)

CREATOR Corporation China 2010-06 WWW.CREATOR1997.COM
38 User’s Manual for MAX-1301HD-B Scaler Switching System
Model
Tech. Spec.
MAX1301HD
Input / Output Signal
Type
RGBHV, RGBS, RGsB, RsGsBs, Composite Video, Component Video
Video System NTSC 3.58，NTSC 4.43，PAL，SECAM
Input Level 0.5V- 5.0V p-p,: 4.0V p-p Normal
Output Level AGC-TTL: 5Vp-p, unterminated
Input Impedance 510 Ω
Output Impedance 75 Ω
Max Transfer Delay Horizontal :90ns Vertical:160ns
Max Ascend/Descend
Time
4ns
Polar Positive or Negative（Fully the same as input）
HDMI Video Input
Protocol Supported HDMI1.3a, DVI1.0, HDCP1.3, x.v.Color, TrueHD, DTS-HD
PIXEL Bandwidth 165MHz, Full Digital
Interface Bandwidth 2.25Gbps
Max Resolution
HDPC 1600x1200@60_24bit Color Depth
HDTV 1920x1080P@60_24bit Color Depth
Clock Jitter <0.15 Tbit
Rise time <0.3Tbit (20%--80%)
Fall time <0.3Tbit (20%--80%)
Signal Type HDMI / DVI-D full digital T.M.D.S. signal in HDMI 1.3a / DVI 1.0 Specification
Interface HDMI-A Interface (Type A connector )
Signal Strength T.M.D.S. +/- 0.4Vpp
Min/Max Level T.M.D.S. 2.9V/3.3V
Impedance 50 Ω
Input EDID Use System Default EDID,( Support Terminal EDID mapping to input terminal)
Max. DC Bias Error 15mV
Max Input Distance
Recommended
Less than 25m, at 1920x1080p@60 (Recommended to use special HDMI wire with
authentication, like Molex TM)
HDMI Video Output
Interface HDMI-A Interface(Type A connector )
Min/Max Level T.M.D.S. 2.9V/3.3V
Impedance 50 Ω
Max Input Distance
Recommended
Less than 10m, at 1920x1080p@60 (Recommended to use special HDMI wire with
authentication, like Molex TM)
Audio Signal
Input/output Interface 4-way 10pin Phoenix Connector / each way is with imbalanced audio input. 1-way 2RCA
connector imbalanced input.
Gain 0 dB
Frequency Response 20 Hz ~ 20 kHz,