CREATOR MAX-1301HD-B - Manual (Page 15)

CREATOR Corporation China 2010-06 WWW.CREATOR1997.COM
9 User’s Manual for MAX-1301HD-B Scaler Switching System
The operation and function are the same as those
of front panel. The following is the panel of remote
controller.
1 Mode and Channel Selection
Remote controller can quickly select the
corresponding channels to CV, COMP, Y/C, VGA,
DVI/HDMI modes.
When selecting HDMI signal input, slightly press
signal source switching key (e.g. key 1, 2, 3 or 4)
to select input channel for HDMI signal source.
Press and hold signal source switching key (e.g.
key 1, 2, 3 or 4) for 1 second to select HDMI (DVI)
video signal + Y/C audio/VGA audio signal as
corresponding input channel. (e.g. press and hold
1/2 key, select HDMI (DVI) channel 1/2 video
signal + Y/C channel 1/2 audio signal as channel
for signal input; Press and hold 3/4 key to select
HDMI (DVI) channel 1/2 video signal + VGA
channel 1/2 audio signal as channel for signal
input).
2 Resolution Selection Key
Press resolution selection key to select the
following resolutions in rotations.
800×600 @60Hz
1024×768@60Hz
1280×720@60Hz
1280×800@60Hz
1280×1024@60Hz
1366×768@60Hz
1400×1050@60Hz
1440×900@60Hz
1600×900@60Hz
1600×1200@60Hz
1680×1050@60Hz
1920×1080@60Hz
Note: In the mode of 800×600 @60Hz, OSD
menu cannot be displayed.
3 MIC Volume Increase/Decrease Selection
Key and Screen Zoom in/out Key.
4 Main Volume Increase/Decrease Selection
Key, MUTE Key.
5 Confirm Key
6 Screen Mode Selection Key
Press screen zoom in/out key to select within the
modes of Full, Normal and Auto, with 16:9/4:3
screen output.
7 Menu Function Selection Key
See 2.5 in Chapter 2 of the Manual for detailed
menu function instruction.