CREATOR MAX-1301HD-B - Manual (Page 11)

CREATOR Corporation China 2010-06 WWW.CREATOR1997.COM
6 User’s Manual for MAX-1301HD-B Scaler Switching System
save it in the system.
3 、 function_3:3 RESTORE VGA DEFAULT
VALUE, used along with ENTER key for restoring
default setup.
2.4.5 HDMI Instruction
In HDMI mode, press and hold HDMI key for 1
second to fine-tune HDMI system parameters.
1、 function_1:1 HDMI brightness adjustment，
used along with parameter+ and parameter-
keys ， When finishing adjustment, press Enter
key to save it in the system.
2、 function_2:2 HDMI Contrast adjustment，used
along with parameter+ and parameter- keys ，
When finishing adjustment, press Enter key to
save it in the system.
3、 function_3:3 HDMI Saturation adjustment ，
used along with parameter+ and parameter-
keys ， When finishing adjustment, press Enter
key to save it in the system.
4、 function_4:4 HDMI Sharpness adjustment，
used along with parameter+ and parameter-
keys ， When finishing adjustment, press Enter
key to save it in the system.
5 、 function_5:5 HDMI Hue adjustment ， used
along with parameter+ and parameter- keys ，
When finishing adjustment, press Enter key to
save it in the system.
6 、 function_6:6 RESTORE HDMI DEFAULT
VALUE, used along with ENTER key for restoring
default setup.
2.5 Menu Instruction
2.5.1 VGA Channel Menu
When selecting VGA signal source input, firstly
press the MENU key on the remote controller to
access to main menu with options including
PICTURE,
SOUND, ADVANCE, OSD and
GEOMETRY. In menu interface, press functional
key “-” and “+” to select corresponding option,
and press functional key ENTER to access to
corresponding setup screen for adjustment. All
option can be adjustable with “-” and “+” keys.
Press MENU to return to upper level menu screen,
until exiting menu setup.
PICTURE Menu Setup Options
PICTURE MODE ： Select picture display
modes including Standard, Dynamic, Sofe,
Personal.
CONTRAST：Contrast adjustment
BRIGHTNESS：Brightness adjustment
COLOR TEMP ： Color temperature mode
selection including Normal, Warm, Cold and User
USER-R： When COLOR TEMP is in User
mode, configure the parameter R.
USER-G： When COLOR TEMP is in User
mode, configure the parameter G.
USER-B ： When COLOR TEMP is in User
mode, configure the parameter B.