Compuprint 4247-X03 - Manual (Page 92)

6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Character Set is displayed.
7. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
8. Press START or RETURN to exit the Menu. See “Exiting the Configuration
Menu” on page 39.
Printer Compatibility 3 (automatic line feed on carriage return)
You can set the printer to perform an automatic line feed on carriage return. You
can set this value to:
Disabled
(Default) No line feed is performed after a carriage return.
Enabled An automatic line feed is performed after a carriage return.
To change or check the automatic line feed on carriage return setting, follow these
steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Printer Compatibility
5. Press ENTER.
6. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Printer Compatibility
3 (Auto LF on CR)
7. Press ENTER to display the current value.
8. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Automatic Line Feed on Carriage Return is displayed.
9. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
10. Press START or RETURN to exit the Menu. See “Exiting the Configuration
Menu” on page 39.
Printer Compatibility 4 (automatic carriage return on line feed)
This parameter is displayed when emulation mode is set to 4247, 4202 III XL, or
2381 Personal Printer.
You can set the printer to perform an automatic carriage return on a line feed. You
can set this value to:
76 User’s Guide