Compuprint 4247-X03 - Manual (Page 163)

Forms Handling Paper Paths
Forms stacking recommendations
We recommend the following maximum stacking height when stacking continuous
forms on the same work surface as the printer.
Forms stack input and output locations
Depending on which forms path you are using, see the diagrams on the following
pages for ways to stack input and output forms for your printer.
For satisfactory stacking results, the distance from the printer stand to the floor
should be 736 to 762 mm (29 to 30 in.) and the distance between the shelf and the
floor should be 381 mm (15 in.). We offer an optional printer stand for your 4247
Printer. For more information on this printer stand, contact your marketing
representative.
Figure 36. Forms Handling Paper Paths
Approximately
76 mm (3 inches)
Approximately
51 mm (2 inches)
Flat Work Surface
C7QU2191
Figure 37. Forms stacking recommendations
Chapter 18. Supplies, optional features, and maintenance 147