Compuprint 4247-X03 - Manual (Page 182)

Operating and service clearance
You should provide adequate space for cooling air, and for operating or
maintaining the printer. This is also helpful if you will occasionally change the
Controller Board. Often, as little as 450 mm (18 in.) of extra table space (or floor
space, for a printer on the optional printer stand) is adequate to service a printer.
Weight
CAUTION:
The 4247 printer weighs 21 kg (46 lbs). Two persons are required to lift
it.
Power consumption
Category
115 Vac
60 Hz 230 Vac
50 Hz
Maximum (Peak) 220 Watts 210 Watts
Operating (Maximum Typical) 155 Watts 145 Watts
Power Saver Mode* 19.2 Watts 20.2 Watts
Idle (Off Mode) 0.1 Watts 0.1 Watts
*Power Saver timeout is 23 seconds.
Heat output
Category
115 Vac
60 Hz 230 Vac
50 Hz
Operating (Maximum Typical) 147 Watts (500 BTU/hr) 138 Watts (470 BTU/hr)
Idle 23 Watts (75 BTU/hr) 23 Watts (75 BTU/hr)
Figure 43. Printer clearances.
166 User’s Guide