Compuprint 4247-X03 - Manual (Page 106)

Data Bits
You can set the size of Input Buffer to:
v
7
v 8 (Default)
To change or check the Input Buffer Size:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Serial Interface
5. Press ENTER and the printer displays
Serial Interface
Data Bits
6. Press ENTER to display the current value.
7. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Data Bits is displayed.
8. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
9. Press START or RETURN to exit the Menu. See “Exiting the Configuration
Menu” on page 39.
Baud Rate
You can set the size of Baud Rate to:
v
300
v 600
v 1200
v 2400
v 4800
v 9600 (Default)
v 19200
v 38400
v 115200
To change or check the Baud Rate:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
90 User’s Guide