Code CR1200 - Manual (Page 8)

C003525_06_CR1200_User_Manual 3
Save Settings
1.3 - About This Document
This document provides the IT professional the information required to install and configure the CR1200 for use in the
workplace. Additional information required by System Engineering to integrate the CR1200 with enterprise software
may be found in other documents provided by Code at: http://www.codecorp.com/support/manuals.htm.
This document is divided into the following sections:
1. Introduction (current section)
2. Getting Started—how to unpack, install, and configure the CR1200
3. Reading Bar Codes—techniques for using the CR1200
4 . Optimizing the Read—performance optimization in unique environments
5 . Setting Symbology—configuration codes for symbology specification
6 . Setting Operational Features—configuration codes for specifying CR1200 features
7 . Maintenance and Troubleshooting—maintenance of the CR1200 hardware and software
Throughout this document you will find codes that you can read with the CR1200 to configure it and to turn various
features on or off.
Cautions: and Notes: provide important information about the use of CR1200 features.
Since any configuration changes are not saved when the CR1200 is powered down, a Save Settings code is provided
at the bottom of each page.