Code CR1200 - Manual (Page 34)

C003525_06_CR1200_User_Manual 29
Save Settings
If you scan the following codes, you may lose your current settings. Make sure to save settings on your reader before
scanning the Suffix codes. If you scan more than one suffix you will receive each scanned suffix in your scanned data;
(i.e., if you scan comma suffix twice, you will get two comma suffixes). Scan the following codes to set appropriate suffix:
Suffix - Carriage Return (RS-232) Suffix - Comma Suffix - Line Feed
Suffix - Carriage Return Line Feed Suffix - Space Suffix - Enter
Use only with
serial applications
(RS-232)
6.5 - Erase Prefix and Suffix Settings
Scan the following codes to erase all prefix and suffix data.
Erase Prefix & Suffix Data
6.6 - Reader Text Commands
Enabling Reader Text Commands allows the CR1200 to accept text commands via serial communications. Scan the fol-
lowing codes to enable/disable reader text commands:
Reader Text Commands On Reader Text Commands Off - Default
Note: Text commands can only be sent to the reader when it is active. Refer to Reader-Host Interface Control Document
for more information. www.codecorp.com/readericd.php.
6.4.2 - Suffix Settings
Use only with
keyboard
applications
Use only with
serial applications
(USB Keyboard Mode)
Suffix - Tab (Keyboard Mode) Suffix - Tab (Serial) Suffix - Erase
Use only with
serial applications
Use only with
keyboard
applications