Code CR1200 - Manual (Page 14)

C003525_06_CR1200_User_Manual 9
Save Settings
2.2.3.1 - Additional RS-232 (Serial) Communication Data Bit Settings
Scan the following codes to set the appropriate data bit:
7 Data Bits 8 Data Bits (Default)
2.2.3.2 - Additional RS-232 (Serial) Communication Baud Rate Settings
Scan the following codes to set the appropriate baud rate:
1200 2400 4800 9600
19200 38400 57600 (Default) 115200
2.2.3.3 - Additional RS-232 (Serial) Communication Parity Settings
Scan the following codes to set parity:
Even Odd None (Default)
2.3.1 - Cabled Reader - Time Out Settings
Scan one of the codes below to set the amount of time a cabled CR1200 will be enumerated before entering sleep mode.
Note: These settings will only work in versions 2098 and above.
Cabled Reader Time Out: 2 hours Cabled Reader Time Out: Never (Default)