Code CodeViewer User Manual
Codeviewer, Quickstart guide

2. Press and hold one of the power/scan buttons or trigger for one second.
Quickstart Guide
C002513_03_CodeViewer_Quickstart
How to Turn the CR3600 on
1. Insert a battery (Figure 1)
Figure 1
CodeViewer ™
How to Lock/Unlock the Keypad
How to Manually Enter Data
1. Begin at the
Ready prompt. (Figure 17)
2. Select
Options. (Figure 17)
3. Select
Enter data. (Figure 18)
4. You can enter numbers, text, or symbols. Press the SHIFT key to toggle between entry
modes. (Figure 19) Press a key multiple times to cycle through the available letters.
Press the 0 key multiple times to cycle through all the available symbols. (Figure 20)
5. When done entering data, press the Enter key to send the data. (Figure 21)
Figure 17
Figure 18
Figure 19
Figure 20
Figure 21
To lock the keypad press the SHIFT key and the up arrow key at the same time.
AND
To unlock the keypad press the SHIFT key and the up arrow key at the same time.
AND
Soft Key
Command Buttons
Trigger
Navigation Button
Good Read Indicator
Power/Scan Buttons
Enter Button
Figure 1
Enter Button
Copyright © 2014 Code Corporation. All rights reserved.