Introduction, Applicability, What’s in the box – Cloud Electronics VTX-WM1 User Manual
Page 4
VTX-WM1 Installation Guide v1.2
4
Introduction
Thank you for purchasing this Cloud product.
The VTX-WM1 Web Monitor Card is an
option for Cloud VTX Series power amplifiers.
Once correctly fitted and configured, it
will allow the performance and settings of
the amplifier in which it is installed to be
monitored at a remote location using standard
Internet browsers on any PC, Mac, PDA or
smartphone, without the necessity for either
dedicated software or hardware.
Topics in this manual include:
•
how to install the VTX-WM1 in a VTX
amplifier
•
how to make the necessary internal
connections and internal jumper changes
•
how to perform the initial card
configuration via an Internet browser
•
how to customise the card to suit the
installation
•
how to use the GUI
NOTE: a short video giving an overview
of the installation of the VTX-WM1 is available
on the Cloud w
. If
fitting a VTX-WM1 for the first time, you may
find it helpful to view this before commencing
the installation.
Applicability
The VTX-WM1 card may be fitted to the
following amplifier models:
•
Cloud VTX4120 4-channel amplifier –
4 x 120 W
•
Cloud VTX4240 4-channel amplifier –
4 x 240 W
•
Cloud VTX4400 4-channel amplifier –
4 x 400 W
Note that the VTX-WM1 is not suitable for
older VTX models, such as the VTX 750, VTX
1200 or VTX 1500.
What’s in the box
Check that the box contains all of the following,
and notify your Cloud dealer immediately in the
case of any absences or evidence of damage:
•
VTX-WM1 PCB card
•
Rear plate (with RJ45 connector slot)
•
2 x self-tapping screws
•
Quick Installation Guide