Cloud Electronics VTX-WM1 - Manual (Page 11)

VTX-WM1 Installation Guide v1.2 11
Colours are used to indicate amplifier
conditions:
•
Green: Normal operation
•
Yellow: Becoming marginal
•
Red: Outside acceptable limits
In the Config area, a green tick indicates that
a function activated by one of the rear panel
switches is ON, a red cross indicates that it is
OFF. The settings of the local and remote level
controls are shown as horizontal bargraphs,
with the “segments” changing from grey to
green as the level controls are advanced.
This page can be closed by clicking on any other
tab, or your browser’s “Back” button.
Site Configuration
Clicking the Config tab opens the Site
Configuration page. Some of the fields on this
page –
Site Name, Site Password and
Email target - will have been completed
during initial site and amplifier configuration.
Login
Access to the site and amplifier configuration
pages may be password-protected to prevent
unauthorised changes to IP addresses, etc. If a
password has been defined and the
Request
login box checked, the password will be
requested before the Config tab is opened.
Request login is active by default. After
logging in with the password, remember to log
out by clicking the
Log out button at the
top of this page.
The Home page is available at all times to all
users, without a password being required.