Cloud Electronics VTX-WM1 - Manual (Page 19)

VTX-WM1 Installation Guide v1.2 19
If the VTX-WM1 is returning error responses, try include a delay between requests (200 ms or so).
Note that commit commands will take longer to execute than update commands.
Response data format
Unit
obj-type=unit
Amplifier level data
name MyAmplifier ASCII string (upto 32 characters)
unit-id
0
Index for this module
model
VTX4120
ASCII string (upto 16 characters)
time 2014-02-24
16:28
Current date and time (YYYY-MM-DD hh:mm)
chcount
4
Number of amplifier channels
cvmask
[0-15]
4-bit mask for Constant Voltage channels.
IP
192.168.1.45
Static IP address
subnet 255.255.255.0
subnet>
Subnet mask
gate-ip
192.168.1.100
gate-ip>
Gateway IP address
Channel
obj-type=channel
Channel level data
chnum
[1-4]
Channel index from 1 to Unit.chcount
unit-id 0 Index for this module
level
[0-90]
Rear panel level
(dB attenuation)
remote_
lev
[0-90]
mote_lev>
Remote level
(dB attenuation)
signal [-90-+20]
nal>
Peak input signal level
(dBu)
hstemp [0-120] Heatsink temperature
(degrees Celsius)
link
[Y|N]
Link switch position (rear panel)
bridge [Y|N] Bridge switch position (rear panel)
hpf
[Y|N]
High Pass Filter switch position (rear panel)
clip
[Y|N]
Clip limiter operation indicator
fanspeed [Y|N]
fanspeed>
High speed fan indicator