Cloud Electronics MA60Media - Manual (Page 14)

MA60 & MA60
media
Installation and User Guide v1.2 14
Installation
Mechanical
The MA60 and MA60
media
mixer-amplifiers may either be mounted in a standard 19”
equipment rack or used free-standing. Each unit occupies 2U of vertical rack space
and half a standard rack width. In order to install MA60/MA60
media
units in a 19”
rack, rackmount kits (available from Cloud) must be fitted. Two types of rackmount
kit are available: one for mounting a single unit, the other for mounting two MA60/
MA60
media
units side-by-side. See below for mounting instructions.
If using the MA60/MA60
media
free-standing, the rubber feet (supplied with each
unit) should be fitted. The unit should always be stood on a flat surface. Care should
be exercised in selecting a location for a free-standing unit, which should allow
ventilation but be clear of any liquid or similar hazard.
Rackmounting a single unit
A single MA60/MA60
media
may be rackmounted with the RE-L mounting kit.
The RE-L kit consists of two rack brackets and eight M4 countersunk-head screws.
To rack-mount a single MA60/MA60
media
, simply fit the two brackets as shown in the
diagram below, using the screws provided.