Cadac S-Type - Manual (Page 37)

Stereo input module 8412 5-9
Revision S2005-6 S-Type
815 5HDU#SDQHO#VWHUHR#LQSXW#FKDQQHO#PRGXOH#;745
LINE INPUT RIGHT
INSERT SEND RIGHT
INSERT RETURN RIGHT
OUTPUT LEFT
OUTPUT RIGHT
LINE INPUT LEFT
INSERT SEND LEFT
INSERT RETURN LEFT
Inputs and outputs are electronically balanced and con-
nected via 3-pin XLRs and follow the wiring convention:
PIN 1 = Screen
PIN 2 = In-phase signal (hot)
PIN 3 = Out-of-phase signal (cold)
The 0.25” TRS jack connectors use the wiring conven-
tion:
TIP = In-phase signal (hot)
RING = Out-of-phase signal (cold)
SLEEVE = Screen
IMPORTANT NOTE: Pin 1 on XLR connectors and the
‘sleeve’ connections on the jack sockets are connected
to the FRAME. This is to ensure that the console can
comply with the Electromagnetic Compatibility (EMC)
directive.