1 front panel - mono input channel module 8411, 1 oscillator, 2 input gain – Cadac S-Type User Manual
Page 20: 3 -20db pad, 4 phase reverse, 5 48v phantom power, Front panel - mono input channel module 8411 -2

4-2
Mono input module 8411
S-Type
Revision S2005-6
714
)URQW#SDQHO#0#PRQR#LQSXW#FKDQQHO#PRGXOH#;744
71414
2VFLOODWRU
Press this button to apply a line-up tone to the input. The frequency and level of the
line up tone is set from the Stereo output, Comms, Osc & Talkback module 8414.
71415
,QSXW#JDLQ
This rotary control adjusts the MIC input gain between +10dBu and +60dBu.
71416
053G%#SDG
Pressing this button applies a -20dBu pad to the MIC input to accommodate for line
level sources @0dBu (0.775V).
71417
3KDVH#UHYHUVH
Press this button to reverse the phase of the incoming signal.
71418
7;9#3KDQWRP#SRZHU
Press this button to switch on 48V phantom power to any connected microphone,
Please note that the 48V phantom power is disabled on this channel if the OSC
switch is selected.
4.1.2 Input gain
4.1.5 Phantom power 48V
4.1.7 Direct output level control
4.1.11 PAN-control
4.1.1. Oscillator
4.1.3 -20dBu PAD
4.1.4 Phase reverse
4,1.6 Direct output select
4.1.8 Sub-Group routing
4.1.9 Stereo
4.1.10 Pan