Setting up a brightsign network – BrightSign HD2000 Network Manager Guide User Manual
Page 6
2
Chapter
1
•
•
•
•
•
•
Setting up a BrightSign network
To use BrightSign Manager, you must first set up the BrightSign HD2000 units and connect
them to a network with Internet access as described in the HD2000 documentation. Next,
you must prepare your CF/SD cards for use on a BrightSign network.
To prepare CF/SD cards for a BrightSign network:
1
Sign into your BrightSign Network Manager account (see
“Signing into BrightSign Network
for details).
2
Create the group for which you want to prepare the CF/SD card (see
for details).
3
Download the Setup File to your computer:
a
Click Setup in the upper-right corner of the
screen.
b
Click the Group list, and select the group for
which you want to prepare the CF/SD card.
c
Click the Time Zone list and select the time
zone for which you want to prepare the
CF/SD card.
d
Click Download Setup File.
4
Extract the Setup File onto your CF/SD card:
a
Insert the CF/SD card into a card reader that is connected to your computer.
b
Extract the Setup File onto the CF/SD card.
c
Repeat steps 4a and 4b to prepare a separate CF/SD card for each BrightSign in this group
and time zone.
5
Prepare CF/SD cards for other BrightSign groups and time zones by repeating steps 2–4 and
selecting the appropriate options for the other groups and time zones.