Updating your brightsign software – BrightSign HD2000 Network Manager Guide User Manual
Page 24
20
Chapter
3
•
•
•
•
•
•
6
Click Browse and select the playlist or CSV file on your computer.
7
Do one of the following depending on the option you selected in step 4:
• Click Upload a Playlist File.
• Click Upload a CSV File.
8
Click Finished.
Updating your BrightSign software
Roku periodically updates the BrightSign Network Manager. When a new version is available, you
can download it from the BrightSign website. The update process is very safe. If for some reason
the update fails, for example if there is a power failure in the middle of the update, the unit boots
in safe-mode and completes the update.
1
Sign into your BrightSign Network Manager account (see
“Signing into BrightSign Network
for details).
2
Download the update file to your computer:
a
Click Setup in the upper-right corner.
b
Under Beta Downloads, click the version you want to download.
c
Click Save, and select the folder in which you want to store the report data.
d
Click Save to begin the download.
3
Extract the update file onto your CF/SD card and give it one of the following names:
• update.rok: Use this file name if you want to auto-delete the update file after the update is
complete. This is useful when you want to distribute the update to the field on the same CF/SD
card that contains the display content. After the first boot, the BrightSign automatically runs
any auto-run content on the CF/SD card.
• update_save.rok: Use this file name if you want to keep the update file on the CF/SD card
after the update is complete. This is useful when you want to use the same CF/SD card to
update multiple BrightSigns.