Beisler 2112-4 - Manual (Page 84)

Short Seam Automat 2112-4 Working Instructions
- D 84 -
Beisler Automated Sewing Equipment
D.3 Programming
Filling spool
Insert thread and fill spool:
• Press
key.
Q
Acknowledge status messages on display:
If the message SPOOL EMPTY is displayed, insert a full
spool and
• Press
% key.
If the message SPOOL: 004 M is displayed when a full
spool is inserted
• Press key twice.
NOTE - Rest thread monitor sensitivity
If the spool is empty and the display does not show a status
message, the photocell sensitivity must be adjusted (see
Section C, Service Instructions).
Resetting the insertion process:
This function depends on the mode of machine operati-
on. It refers only to machine movements that can be per-
formed before the automatic operation.
The machine movements will be reset to start position.
• Press
key (several times if required).
"
D.3.2 Service menu start level
Manual testing of the cutters
Sharpness and function of the three cutters can be chek-
ked individually. When the corresponding function key is
depressed, a cutting movement is performed.
1. Request the cutter test menu.
• Press
key.
M
The display shows the symbols of the selectable functions
on this level.
& &G GHIR
2. Rear working plate cutter (left trousers component).
G
• Press key.
3. Front working plate cutter (right trousers component).
H
• Press
key.
4. Pick-up plate cutter (left slash selvage).
I
• Press
key.