Beisler 2112-4 - Manual (Page 55)

- C 55 -
Short Seam Automat 2112-4 Working Instructions Beisler Automated Sewing Equipment
C.5
Maintenance
C.5.5 Machine set-up
Folder to clamp rail alignment:
The lowered folder must be absolutely parallel to and in
slight contact with the clamp rail along its entire length.
Folder position adjustment:
1. Move main clamp to position using input/output con-
trol functions:
• Lower main clamp.
2. Move folder to position using input/output control func-
tions:
• Rotate folder.
• Close folder clamp.
• Lower folder.
3. Fig. 17: Check parallel alignment of folder clamp
4
to clamp rail
3. To change the folder clamp alignment:
4. Loosen lock screw
1.
5. Rotate folder clamp bracket
2 to parallel position.
6. Tighten lock screw
1.
Fig. 17
Fig. 17