Beisler 2112-4 - Manual (Page 79)

- D 79 -
Short Seam Automat 2112-4 Working Instructions Beisler Automated Sewing Equipment
D.3
Programming
D.3.1 System menu
Erasing seams:
Request sewing program and mark seam number to be
erased using cursor (seam number is underlaid black).
• Press
0 or / key
• Press key.
• Press
key (init parameters).
• Press
% key.
• Press
key (erase seam).
• Enter seam number using numeric keypad.
Confirm safety prompt, press
% key.
NOTE - Deleting seam numbers
If a seam number is deleted, it is removed from all
sewing programs into which it had been inserted
Copying seam numbers:
Use this function to copy the properties of a factory-pro-
grammed sewing program or of your self-configured se-
wing programs into other sewing programs.
During the copying process, all seams of a sewing pro-
gram are transferred so that the existing properties of a
sewing program will be overwritten completely..
1. Request sewing program (destination) and mark desi-
red seam number (source).
• Press key.
2. Enter two-digit seam number using numeric keypad.
• Press
key.
• Press
key (init parameters).
• Press % key.
• Press
key (copy seam number).
• Enter two-digit seam number using numeric keypad.
The display shows *O.K. PLEASE WAIT* to indicate that
the copy process has been successfully completed.
NOTE - Seam sequences!
Just as the seam sequence can be selected at will, a seam
can be written into a sewing program once or several ti-
mes. A sewing program may consist of up to six seams.