Beisler 2112-4 - Manual (Page 28)

Short Seam Automat 2112-4 Working Instructions
- B 28 -
Beisler Automated Sewing Equipment
B.3
Operation
B.3.4 Activating additional seam numbers
1. Select seam number of desired seam.
Move cursor to seam number:
• Press
0 or / key.
Confirm selection:
• Press
% key.
The seam number of the activated seam appears blacke-
ned.
B.3.5 Deactivating a seam number
1. Select seam number of desired seam.
Move cursor to seam number:
• Press
0 or / key.
Confirm selection:
• Press
% key.
The seam number of the deactivated seam is no longer
blackened.
B.3.6 Setting the thread clamp manually
Before the first start of a sewing program, the top thread
clamp must be activated to protect the top thread from
being pulled out of the needle when the machine starts.
• Press
key.
B.3.7 Operating the stacker
To ensure easy access to the sewing pieces on the stacker,
the lift table can be lowered, and the sliding table can be
moved backward.
1. Lower or raise the lift table.
• Press
key.
2. Move sliding table forward or backward.
• Press key.