Avery Dennison Monarch 926 Knife - Manual (Page 8)

8
5. Repeat steps 2 - 4 for the other cam.
6. Wipe off any excess grease from the top cover of the knife.
7. Turn on the printer.
T a g C u t D i m e n s i o n s
Use these specifications for the knife.
Widths: 0.75 to 4.0 inches (19 mm to 102 mm)
Lengths: 0.75 inches (19 mm) without cutting
1.2 to 16.0 inches (30 mm to 406 mm) with cutting
Note: The maximum cut tag length using the stacker
is 3.66 inches (93 mm).
Thickness: 7 to 10 mils
Batch Separator: 3.66 inches (93 mm)
Using the 9855RFMP Printer
The above specifications apply to using the knife with an RFID printer with
the following exceptions:
 The minimum cut width is 1.5 inches (38 mm).
 The minimum cut length is 1.5 inches (38 mm).

Use only Monarch
 approved RFID tag supplies.

The knife can cut our manufactured tags up to 14 mils thick only for RFID
applications. We do not recommend cutting competitor's RFID supplies.
 The limited warranty on knives used in or with RFID printers is one (1)
year from the date of shipment, or 500,000 cuts, whichever occurs first.