Avery Dennison Sierra Sport4 9493 Vehicle Mount - Manual (Page 3)

3
R e p l a c i n g t h e F u s e
The vehicle mount uses an NRTL listed 10-amp,
250-volt fast blow fuse (order part 128022).
The fuse is located on the cable on the right side
of the vehicle mount.
To replace it:
1. Push in and twist the fuse holder
counterclockwise to open it.
2. Remove the fuse.
3. Insert a new fuse of equal rating. The
replacement fuse must have a DC voltage
rating of at least 250 volts.
4 . Place the two halves of the fuse holder
together and push in and twist clockwise to
tighten it.
F u s e h o l d e r