Avery Dennison Sierra Sport4 9493 Vehicle Mount User Manual
Page 10
10
U s i n g t h e E x t e r n a l S u p p l y H o l d e r
Use the optional external supply holder with larger
supply rolls. Feed the supply through the printer
using the fan-fold supply slot. Refer to the printer’s
documentation for more information on loading
supplies.
Installing the External Supply Holder
Following is a list of the mounting hardware
included with the supply holder:
four M5 hex nuts
four star lock washers
one mounting plate
To attach the supply holder to the vehicle mount:
1. Remove the printer from the vehicle mount, if
attached.
2. Remove the mounting plate from the supply
holder by removing the four nuts and lock
washers.
3. Insert the posts in the mounting plate into the
four slots in the bottom of the vehicle mount.
The mounting plate goes on the “inside” of the
vehicle mount.
M o u n t i n g P l a t e