Avery Dennison 9820 Addendum - Manual (Page 5)

5
You will see
Cut After Batch:
No
r
♦ If you want to cut after every batch, press R to display "Yes" and press
E. The knife cuts before the first tag and cuts after batch, so the tags
are cuts in strips. This is the same as cut mode 2.
You will see
No cut before?
No
r
♦
If you do not want to cut before the first tag in a batch, press R to
display "Yes" and press E. The knife does not cut before the first tag
in a batch, but does cut between each tag and after the last tag in a
batch. This is the same as cut mode 4.
You will see
Quantity
[1/32000]: 1
Type the number of tags or sets of tags you want to print in this
batch and press E, or accept the default value of 1 by pressing
E. A cut multiple of two with a batch quantity of 30 prints 30 tags
(15 sets of two tags). You will see
MAIN MENU
l Print Mode r
Press E. The batch begins to print. The display counts the tags
as they print and how many tags are in the batch.
S e t t i n g F o r m a t O p t i o n s w i t h t h e O p t i o n a l K e y p a d
The optional keypad must be purchased separately. You can select
Format Options to change which prompts appear during Batch Entry mode
and set default values for those prompts. You can also set a default value
for the prompts, "Cut After Batch" and "No Cut Before." Refer to your
keypad's Operating Instructions for more information about selecting which
prompts appear and default values for those prompts.