Avery Dennison 9820 Addendum - Manual (Page 3)

3
C h a n g i n g t h e C u t M o d e
This is only valid on 9835 or 9840 printers with the knife option. A new cut
mode has been added not to cut before the first tag, but cut between each
tag and after the last tag. The cut options are set through the optional
keypad or through the Batch Control Field. Refer to the optional Packet
Reference Manual to learn how to define the Batch Control Field.
Setting the Cut Options From the Optional Keypad
The optional keypad must be purchased separately.
The 9835 or 9840 printer can be set to cut after the last tag in a batch. After
you enter data for all the fields in your offline format, you will see
Number of parts
[1/5]: 1
♦
Type the number of times the data prints across the tag width and press
E, or accept the default value of 1 by pressing E. If your printer
has a knife, you will see
Cut option
l No r
If you want to cut tags, press R to display “Yes” and press E.
See “Cutting Tags” for more information.
♦
Type the number of times the data prints across the tag width and press
E, or accept the default value of 1 by pressing E. If your printer
does not have a knife, you will see
Print Multiple
[1/32000]: 1
Follow the rest of the prompts to print all the tags in one strip. You
do not see any cut prompts.