Avery Dennison 9460IP Setup Guide - Manual (Page 3)

3
Checking the Status
This option displays the status of the RF network.
1. From the RF Network menu, select Status.
192.168.069.062
S1.10 020 104
Version 1.10
WHSEFLR
The local IP address, firmware version, software version, and device
name are displayed.
2. Press any A button to see the next screen of information.
OIKOB1ZO3B54
Protocol: TCP
State: Wait
Radio: IEEE 802.11b
The MAC address, protocol, current state, and radio type are
displayed.
3. Press any A button to return to the RF Network menu.
Resetting the RF Network
This option resets the radio, because it cycles the power off and then back
on.
NOTE: You may lose your current connection and application.
1. From the RF Network menu, select Reset.
Reset command
sent. Hit key
to continue.
2. Press any A button to return to the RF Network menu.