Avery Dennison 9460IP Setup Guide - Manual (Page 2)

2
3. Press the A button under the T icon (Tool Box) to enter the program.
Tool Box
Language
E D
4. Tool Box is highlighted. Press the A button under the E icon to select
Tool Box.
Enter Password
5. Press the navigational buttons in this order: Right, Center, Left,
Center, Right. The Service Diagnostics menu appears.
6. Press the A button under D until you see
Setup
Service
Eu U D
7. Service is highlighted. Press the A button under the E icon to select
Service.
Totals
Sensor Cal
E D
8. From the Service menu, press the A button under D until you see RF
Network. Press the A button under the E icon to select RF Network.
The following menu shows the RF Network options.
The RF Network menu allows you to check the printer’s status, configure the
RF network settings, and reset the radio.
To exit, press the F button at any time.
Status Configure Reset Exit
RF
Network