Avery Dennison 9450 RASCAL Rev.A 1/95 Quick Reference - Manual (Page 4)

0¦0¦0¦10¦4¦4¦0¦0¦¦^
Fixed Data Function R only. Up to 40 bytes of fixed data for the
field, or the starting number for an incrementing/decrementing field.
Data Attributes Function R only. 0 (line, graphic, variable text, or
bar code that doesn’t increment/decrement), 1 (fixed data),
2 (incrementing field), or 3 (decrementing field).
Printing Attributes Function R only. 0 (line, graphic, or if text, black
characters on white), 1 (white characters on black-- text only), or
16-406 (height of bar code in dots)
Multiplier 2 Function R only. 0 (graphic, line, or wide element width of
UPC, EAN or Code 128 bar code), 1-4 (text height multiplier), or 2-16 (wide
element (thick line) width of all other bar codes).
Multiplier 1 Function R only. 0 (graphic), 1-4 (text width), 1-8 (narrow element
(thin line) width of bar code), or 1-10 (thickness of a line in dots).
Field Type Function R only. A (lines), a (UPCA), b (UPCA +2), c (UPCA +5),
d (UPCE), e (UPCE + 2), f (UPCE + 5), g (EAN 13), h (EAN 8), j (EAN 13+5),
k (Code 39), l (I 2 of 5), m (Codabar), n (Code 128 set a), o (Code 128 set b),
p (Code 128 set c), q (MSI), or E-Z (graphics). If a text field, use 1-12 or 16 to specify a
standard font, or use a custom font identifier.
Justification Function R only. 0 (left-justified or non-text field), 1 (centered), or
2 (right-justified).
Rotation Function R only. 0 (0 degrees) or 1 (90 degrees). Use this field only with text or bar
code fields.
Text Field Type Function R only. 0 (fixed-length field) or 1 (stretch field). Use this field with only text
fields.
Request Printer Status (^S)
The Request Printer Status command asks the printer for its current state. The
printer responds with the Status response.
^S¦^
Command Identifier