Avery Dennison 9450 RASCAL Rev.A 1/95 Quick Reference - Manual (Page 3)

Print (^P)
The Print command prints a batch of labels using a specified format.
^P¦1¦1¦ACME HARDWARE¦43373737376¦^
Field_1 ... Field_n Data for each field in the format.
Quantity Number of labels to print (1-9999).
Identifier Format identifier.
Command Identifier
Define Field (^R)
The Define Field command creates or deletes fields.
NOTE: Due to page limitations, this command summary appears as two lines. In a
data stream, this command must appear on one line.
^R¦1¦R¦50¦50¦10¦35¦
Length Function R only. Length of the field in dots (1-1015).
Length+Length Coordinate may not exceed 1015.
Width Function R only. Width of the field in dots (1-383).
Width+Width Coordinate may not exceed 383.
Length Coordinate Function R only. Point along length axis where the field
starts (0-1015).
Width Coordinate Function R only. Point along width axis where field starts
(0-383). Together, Width Coordinate and Length Coordinate specify the upper-left
corner of the field.
Function R (add field) or DR (delete field).
Field Identifier 0-9, A-Z, a-z, :, ;, <, =, >, ?, @, [, \, ], -, and ‘. Use $ to delete all fields and
formats. Monarch recommends you use only
alphanumeric characters for this field.
Command Identifier
continued on next page