Avery Dennison 9406 Messages Manual - Manual (Page 22)

21 Invalid horizontal magnification. Use a number from 1
to 7.
30 The bar code height is greater than the image length.
The height limit is 8 inches.
31 The human-readable portion of the bar code is invalid.
See the
System Administrator’s Guide for a list of
values.
32 Invalid bar code type. See the System Administrator’s
Guide for a list of values.
33 The bar code density is greater than the maximum
allowed. See the
System Administrator’s Guide for a
list of values.
40 The line thickness is too large. Valid thicknesses are
1 through 99 dots.
41 The vector angle is greater than 359 degrees. Use an
angle from 0 to 359 degrees.
42 The end row falls outside the image length. The
maxmimum image length is 8 inches.
43 The end column falls outside the image width. The
maximum image width is 4 inches.
50 The graphic ID is out of range. Use an ID from 1 to 99.
51 Invalid imaging mode. You must use zero.
101 The number of prints is outside the valid range. Use a
number from 1 to 9999.
104 The batch ID is out of range. Use a number from 1 to
99.
106 The batch field number is greater than 30. Enter a
smaller number.
200 Invalid rule number. Use 1, 4, 5, 30, 31, 42, or 60.
300 The printer does not support database packets. It
supports only check digit and graphics packets.
9406 Messages Manual
A-2