Avery Dennison 9406 Messages Manual - Manual (Page 16)

NVRAM corrupted
CDs 79FF The NVRAM device is clear and
it is about to reinitialize itself with
the printer’s default data.
Out of Paper.
Press ENTER. The printer is out of supply or it is
not loaded correctly. To correct,
re-load the supply.
Pre-Image Error:
Incorrect Format You sent the printer a pre-image
packet with an invalid format ID
number. The format you
specified is invalid for a
pre-image packet.
Correct the format ID number
and send the packet again.
Pre-Image Error:
No Format Found You sent the printer a pre-image
packet with an invalid format ID
number. The format you
specified does not exist.
Correct the format ID number
and send the packet again.
Printhead Closed
Press ENTER. The printhead is closed and
ready to resume operation.
Printhead Open!
Close Printhead The printhead is open. Close the
printhead. If the message
persists, call Monarch Service.
PRINT MODE
Drawing... The printer is compiling the
graphic data for the batch you
downloaded.
PRINT MODE
Imaging... The printer is compiling the
imaging text data for the batch
you downloaded.
9406 Messages Manual
3-10