Avery Dennison Monarch 9416 XL Quick Reference - Manual (Page 20)

Printing Test Labels
1. Turn off the printer.
2. Press and hold the FEED button while turning on the printer.
3. Release the FEED button after the printer starts flashing
ORANGE. The test labels print.
The first label shows the printer's configuration by packet
(A-F). Refer to the Packet Reference Manual available on
our Web site for more information.
The second label shows the model number, software
version, communication settings, speed, contrast, gap
sensor (die cut sensor) setting, label length, and total
number of inches printed.
The third label shows network parameters when the printer
is connected to the network. When the printer is not
connected, zeros print instead of parameters.
4. To resume normal printing, turn off the printer, wait two
seconds, then turn it back on again.
20