Avery Dennison Monarch 9416 XL Quick Reference - Manual (Page 19)

Problem Action
Make sure the supply is loaded
correctly. See “Loading Supplies,” for
more information.
Clean the printhead.
Check the supplies and ribbon (thermal
transfer printers) for damage or defects.
Reload supplies or ribbon if necessary. Printing is faded or poor
quality.
Adjust the print speed/darkness
(contrast). Refer to the Packet
Reference Manual for more information.
Supply might be caught in the printer.
Make sure the supply and ribbon
(thermal transfer printers) are loaded
correctly.
Supply exits partially
out of the printer or
skips.
For thermal transfer printing, make sure
thermal transfer supply (requires a
ribbon) is loaded. For thermal direct
printing make sure thermal direct supply
(does not require a ribbon) is loaded.
Ribbon is installed but
is not advancing when
printing (thermal
transfer printers). Calibrate the ribbon sensor. See
“Calibrating the Supply” for more
information.
19