Avery Dennison Pathfinder 6057 Operator Handbook - Manual (Page 31)

Troubleshooting 6-7
E r r o r C o d e s
This section lists common error codes and their descriptions.
Code(s) Description
004 - 005 Supply size is incorrect. Reload the correct supplies.
267 – 271
410 - 413 Communication error. See your System Administrator.
703 - 704 Supply Error. Load supplies or make sure they are loaded correctly. See “Loading
Supplies” in Chapter 3 for more information.
706 Remove any jammed supplies. See “Clearing Supply Jams” in Chapter 5 for more
information. If the supply is not jammed or you have removed the jam, and the error
continues, see your System Administrator.
750 Printhead is overheated. Turn off the printer to let it cool.
751 - 753 The printer sensed a problem with a mark on the supplies. Check the supplies to see if
they are loaded correctly.
756 The printer is out of supplies. Load supplies. See “Loading Supplies” in Chapter 3 for
more information.
757 The calibrated supply length differs by plus or minus .25 inches from the format. Load
supplies.
758 Check supply. Remove any printed labels. Check for a label jam. Clear the supply
path or reload supplies.
762 Low battery. Recharge the battery. See “Charging the Main Battery” in Chapter 2 for
more information.
763 Waiting to dispense label. Press the trigger.
768 Printhead error. See your System Administrator.
790 - 791 The printer is busy or has an error pending. Turn off the printer, wait two seconds, and
then turn it back on.
904 – 911 System error. See your System Administrator.
SYSTEM
ERROR
VECTOR ## System error. See your System Administrator.
T e c h n i c a l S u p p o r t
If these solutions do not work or you have a problem or error code not listed, see your System
Administrator or call Service at the number listed on the back of this manual.