Clearing supply jams -4, Storing the printer -4 – Avery Dennison Pathfinder 6057 Operator Handbook User Manual
Page 28

5-4 Operator's Handbook
Clearing Supply Jams
To clear a supply jam:
1. Turn off the printer and open the supply cover completely.
2. Open the label deflector by gently pushing down on the label deflector.
3. Remove the supplies.
4. Carefully remove any jammed supply.
Note:
Do not pull the jammed supply out through the front of the label deflector. Do not use
sharp objects to remove jammed supplies.
5. Clean any adhesive build-up.
6. Reload the supplies, close the supply cover, and close the label deflector.
S t o r i n g t h e P r i n t e r
Do not store the printer in or near
magnetic fields
wet or damp areas
dirty or dusty areas
areas of intense vibration or shock.
This manual is related to the following products: