Insert installation, Installation preparation, Items required for installation – Avalon Firestyles DVS Insert-1996 to 2000 User Manual

Page 6: Items packed with the travis ind. dvs, Items packed with the face, Order of installation

AGE

NSERT

NSTALLATION

- For Qualified Installers Only!

Installation Preparation

Failure to follow all of the requirements may result in property damage, bodily injury, or even
death.

This appliance must be installed in accordance with all local codes, if any; if not, follow ANSI
Z223.1 and NFPA 54(88).

In Manufactured or Mobile Homes must confirm with: In USA, Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 3280; In Canada, CSA Z240.4 and Gas-
Equipped Recreational Vehicles and Mobile Housing. This appliance may be installed in
Manufactured Housing only after the home is site located.

This appliance is designed for natural gas but may be converted to propane (LP). Check the
sticker on top of the gas control valve.

All exhaust gases must be vented outside the structure of the living-area. Combustion air is
drawn from outside the living-area structure.

Notify your insurance company before hooking up this appliance.

The requirements below are divided into sections - all requirements must be met
simultaneously.

Items Required for Installation

Face

Gas Hookup Equipment

Surround Panels (Includes hardware, trim, and insulation)

3" (75 mm) UL 1777 Gas Liner

Direct Vent Cap (Simpson Duravent Part # 991)

Direct Vent Adapter (Simpson Duravent Part # 923GK)

Items Packed with the Travis Ind. DVS

DVS Insert

Log Set (2 Logs, 2 Twigs, Embers)

Owner's Manual

Propane Conversion Kit

Two Leveling Bolts

6" Pipe Inlet (3/8")

Items Packed with the Face

Face (and door)

Attachment Screws (FPX 32 DV's include face mounting brackets)

Face Installation Instructions

Order of Installation

If the heater is to use propane, install the propane conversion kit (see pages 28 - 33)

Install gas line into the fireplace (do not connect to unit)

Position the heater (see "Insert Placement")

Connect the gas line and gas vent to the appliance.

Install the optional surround panels and trim. Attach the on/off switch.

Follow the instructions under "Finalizing the Installation" on pages 14 through 17.