Avalon Firestyles DVS Insert-1996 to 2000 - Manual (Page 30)

P AGE 30
O
PTIONAL
E
QUIPMENT
(C
ONTINUED
)
4 Follow the directions below to remove the natural gas orifice. Apply thread sealant to the LP orifice
(.0625 dia. - it has ".0625" stamped on it) and tighten in place with a 1/2" open end wrench. Replace
the spring. Slide the adjustable shutter back in place.
37
.0625
Push the adjustable shutter to the
left, off the orifice (be careful not
to bend the shutter linkage).
1/2" Wrench
Slide the adjustable shutter
down, away from the orifice. Remove the spring
Use a 1/2Ó open
end wrench to
unscrew the
orifice.
The LP orifice has
Ò.0625Ó stamped on it.
The NG orifice has Ò37Ó
stamped on it.
Apply thread
sealant to the
new orifice
prior to
installation.
Adjustable
Shutter
Orifice
Shutter
Linkage
a b c
d e f
NOTE:
Screw the LP
orifice in so 7/8Ó
(23 mm) or the
orifice protrudes
(indicating full
insertion).
5 Re-attach the burner pan and burner box front to the burner pan box following the instructions in
step 3 in reverse order.