Auto-Zone Control Systems Prism 2 Graphical Interface Technical Guide (Version 01J) - Manual (Page 34)

STEP 12: CREATING CUSTOM SCREENS
Prism 2 Technical Guide
34
Creating a Sample Screen
Place Jump : Place a Jump button on your custom
screen if you want to directly jump to other custom
screens from this screen. You can place a Jump button
on any of those screens to jump back to this originating
screen.
Place Image : Use this button to select and load a graphic
image onto the background of your custom screen.
Background Color : If you are not placing any
background pictures, use this button to select a
background color for your custom screen.
Edit Bitmap : Use this button to edit the loaded graphic
image if it is in a format that is readable by the Microsoft ®
Paint program.
Cut or Delete Item : If you placed a text or data fi eld
by mistake, you can delete it from the screen with this
button.
Clear Screen : Use this button to clear the screen
completely of all items.
Edit Text/Jump : Use this button to edit and format text.
This button is also used to designate Jump fi eld fi les.
Edit Data : Use this button to edit and format data.
Creating a sample screen
Click the < Place Data> button.
A new data fi eld labeled Data 1 will
appear in the upper left corner of the
screen.
You can left-click the box, hold the mouse
button down, and drag it to a new location.
Now click on the < Place Text> button to place a text
fi eld on the screen.
Move the text fi eld above the data
box the same way you moved the
data fi eld. Your screen should now
look like the one shown at left.
Let’s say you want a Space
Temperature data fi eld and want
the text box to identify it. The next
step is to change the text in the
Text Box and also its appearance to
identify the data fi le.
Click the box labeled Text 2 and then click the < Edit
Text> button.
The Style Selection Window will appear. This window allows you
to change the appearance and the actual text in the Text Box. Make
the selections shown in the example.