Artesyn MVME721x RTM Installation and Use (April 2015) - Manual (Page 26)

Hardware Preparation and Installation
MVME721X RTM Installation and Use (6806800M42D) 26
2. Check your shipment and report any damage or differences to the contact center at
[email protected] .
3. Remove the desiccant bag shipped together with the RTM and dispose of it according to
your country’s legislation.
2.2 Requirements
In order to meet the environmental requirements, the RTM has to be tested in the system in
which it is to be installed.
2.2.1 Environmental Requirements
The environmental conditions must be tested and proven in the shelf configuration used. The
conditions refer to the surroundings of the RTM within the user environment.
Before you power up the RTM, calculate the power needed according to your combination of
blade upgrades and accessories.
 The RTM is thoroughly inspected before shipment. If damage has occurred or items are
missing during transportation, contact our customer service immediately.
 Remove the desiccant bag shipped together with the RTM and dispose of it according to
your country’s legislation.
 The environmental requirements of the blade may be further limited down due to
installed accessories, such as hard disks or PIM modules, with more restrictive
environmental requirements.
 Operating temperatures refer to the temperature of the air circulating around the blade
and not to the actual component temperature.